Members Garyak Posted December 5, 2021 Author Members Report Posted December 5, 2021 16 hours ago, SARK9 said: If you can get the right parts. You will need all the usual stuff: Inner and outer foot, feed dog, needle plate and possibly a needle bar as well. I can't tell if your check spring is still there for the thread controller assembly, but both sets of tension discs and springs are missing. If you use the 144W style of outer (presser) foot, you will have to rotate the presser bar 90 degrees. The Juki LG-158 I have has single and double needle versions....mine was the 158-1 (single) but I didn't care for the original setup for those same parts and made some with a more specific design for my work. The good news is it seems that some of the Singer parts are more plentiful, but there's not really a lot of variety. -DC That’s pretty slick Man. I dig it. Quote
Members Garyak Posted January 19, 2022 Author Members Report Posted January 19, 2022 Thanks everyone who commented. It was a lot of fun learning about feed eccentric and safety clutches. Well worth the nothing I paid for it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.