Jump to content

Recommended Posts

  • Members
Posted

Ok, the machine finally has been assembled and I appear to be having a problem with the threading.

The thread seems to "ALWAYS" pop out of the Thread Controller then gets wrapped around it in a funky manner and eventually pops the thread.

Anyone have a 618-1sc they can help me thread this thing, i may be doing something awfully wrong and I don't want to harm my shiny new machine.

anarchy.gif
  • Members
Posted (edited)

The very quickest solution to your problem is to dial 888 838 1408 and ask for Steve. He will talk you through your problem while you are sitting at the machine, assuming you have a portable phone. Is your machine the 618-1sc or the 618-1scLTHR? Jerry and Steve are super at solving problems.

Paul

Edited by sheathmaker

Paul long-----108 Briarwood Ln. W-----Kerrville, TX--78028------830 367 5536-- pfl@cebridge.net

  • Members
Posted

Funny you mention steve.

I spoke with him last nite, he's at some trade show though. I had to talk with Tom this afternoon but we put our brains together and figured out that it was the little finger like thing in the rear of the thread controller that had too much gap which was allowing the thread to pop out. Thanks

anarchy.gif

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...