Hi, all. I have a Hansen string cutter and also a rounder. They are the original style Frank made, and have a base with drilled holes which you then bolt down onto...whatever...I bolted them onto a board and then would clamp the whole unit to a work table. (I see that the new ones have a built-in clamp). It also has the original style of locknuts (not the wingnuts). For me personally, I think the old style is much superior because you can REALLY tighten it down rather than just finger-tighten, but that's just my preference. It was used very gently, on goathide only, for 2 years and then has been carefully stored ever since. It has a lovely patina. (I think!) As you all probably know you can get a new splitter off the Hansen website for $445 including shipping, and the rounder for $235 including shipping, so that's $680 for both. I'll sell my set for $440 including shipping if you live in CA, NV, OR or AZ, and $450 if you live elsewhere. Thanks for your interest. The best way to reach my is by direct email which is westernartist@gmail.com and my name is Jeanne Miller.