Leathershark

just the sheath, I have all the knives that I make sheaths for. Or customers send me a knife and I make a sheath to fit their knife, if I do not have it.

This is my piggy back 110 and 119 custom piggy back sheath. sells well.

I just got in some tanned rattlesnake skins. that are not glycerin preserved, you can see the difference. no tack holes, they are perfectly dry, no oil feel , the flesh side is dry and almost white. They lay flat no curl.

Made a couple Sheaths today that fit a Buck 110 folder knife. These are lined inside with soft goatskin, no metal contact with your knife. Coversd outside with real tanned Diamond back rattlesnake skin. Used 2 to 3 ounce veg tan leather. stiched with 277 thread. Takes me about 1 hour to make one. Any thoughts for improvement?

I work a lot with snake skins, the glycerin method is not tanning. It only preserves the skin. True tanning turns the skin to leather. I will not buy glycerin preserved skins for leather work. Hard to glue, and they have a yellow look to them. The skins I get from my supplier are flat and almost white looking on the flesh side. He holds his formula very close. will not tell anybody how he does it. But I am in leather work not tanning business. So best to just buy the skins from him.

Made this pure white Sheath today, with gold snap, chicago screws, and gold stiching. Let me know what you think.

What are tags? What do they do?

Looking to get a techsew SK-5 or Cobra NP-10. My question is can it skive at an angle from 12 oz down to 2 oz in one inch skive. Or do they only skive flat. All the Demos I see show skivers removing leather so you can fold and sew. I want to taper the skive down . If anyone has these machines please let me know before ai spend a couple thousand to find out it does not do what I want.

If you just want leather, look into American Leather Direct. I have a wholesale account. Have had good luck and srvice with them.

Item sold local. thank you for looking.

Randall is cheaper. lol

That is easy. just use 10 to 12 ounce leather, try and get it the same distance as the guard to the blade. Skive this piece about 1 inch down to 2 ounce. This piece is width of the sheath and about 3 inch long. Put your welt on top of it, then put your cover on top of that. This is then put on the back part of the sheath. You now havw a slot that the blade fits in. If you want a picture let me know.

Just made this sheath for a customer. It fits a Randall 14 attack knife. comes with sharping stone and leg tie. has 2 straps to hold knife secure. The blade sits in a raised slot so the guard does not push against the belt loop. Has Brass Chicago screws to make sure it does not come apart at the top and where the guard rest.

Thanks for the advise. I need a heavy duty machine that can do a sloped 1 inch skive. maybe even 240 volt motor. I like to have more than I need rather than maybe not enough power. Could not see your link as it sent me to Facebook. Zukerburg has enough money, I do not want him to have any from me. Do not like him giving to Democrats. Thank you for reply.

Looking for heavy duty good used machine like the Cobra NP-10 or the Techsew SK-5. My use is on leather from 6 to 12 ounce. close to south Florida would be nice.