depodarcom

I bought this machine 2 weeks ago. I havent used before. Stitch lenght dialer was stuck at first. I remove it and all the story started. 😢 I have lots of reserse mechanism machine but none of them resembles this.(Brother Ls2b837-DA669-Singer 196k5).Even the most similar one is 196K5 but when I press reserse in 196K5 it bounce but this has nothing. Also by turning the stitch disc, reverse lever should go up or down but this is motionless. Since its weight, I dont want to move the service May be I should try to change assembling order of parts.

I found one of my mistake and corrected.But there are still problems. I was trying to attach numarator disk(56032) without removing the screw rod(50338). First I removed 50338 from machine and then attached 56032 to it. After that insert them into machine ,then pin and spring. Now, numarator part is working but although I attached the reverse pedal connector(52409) to the fork type metal part(52408) when I try to start machine, reverse pedal lever drops down and stitch moves backwards. I think there is no suitable connection between reverse lever and numerator part. How can I do this?

Hello, I have a Singer 96k12 industrial sewing machine. Stitch lenght numerator is not working. As I read from the 96K12 pdf, stitch length numerator is defined as "thumb screw" "D",and reverse lever is defined as "E". as can be seen from the photo. I demount thumb screw part but I couldnt assemble again.😢(I have spring, lock pin and numerator disc) Reverse Lever E is connected with fork type metal at the inner side (neck )of machine My question is; What will be the key points for this assembling? Is there any correct position of "D" and "E"while assembling.(D at max or min) Or any other important thing like this. Thanks

Hello, I have a question about my 45k53 machine, Since I couldnt find parts list for 45k53, I dont know how it would be but, I want to rebuilt foot lifter lever . I have also one 45k25 and I have completed rebuilding for 45k25 . From this topic , I have seen this photo with lever system And also I want to share my machine photos, I just want to learn the shape of part,in order to produce a utilizable replica of it. I think it should be a bit diffrent from the one 45k25.(part code 91716) If possible, Could you please share the photo of foot lifter lever for 45k53 (or part code of it) Thanks

Thanks for your replies. Im going to search for Adler and GA5. it would be a bit difficult I guess

I have the same problem, links at previous posts are no longer exist. May I use Chinese made standart 28mm roller foot with Singer 45k25. I couldnt find one consistent with GA5-1

With the help of this web site and your valuable suggestions,I have already completed my 45k25 table and knee lift projects. I would like to thank member nickname “jimi” for sharing machine table size post at https://leatherworker.net/forum/topic/74406-singer-45k-treadle-base-parts-information-or-parts-list/ by means of this subject I could reshape my old fur sewing table with jigsaw. and also member nickname “friquant” for valuable video sharing . Even though I know knee lifter mechanism ,I could not imagine application with chain, and watching this video made my work. I bought an original Singer knee mechanism from one of dealers in my city,but I couldn’t find the hook like part,instead of this I used allen no 7 and 1.5 . I drilled a hole on 7 and inserted into allen 1.5 as “hook” for pulling chain mechanism. I tried and it seems working. Thank you 👍

Thank you to all members who responded this topic. I will continue to try on, with the help of your suggestions.

Thank you ..This seems good and useful for me. I am also searching for "stirrup" that is used for horse riding..

I have complated my singer 45k25 table project by cutting old fur sewing machine table. I attached the main body but how can I activate foot lifter .I couldnit find any clue from old writings.For new machines it is called as knee lifter I guess. What should I do for activating my machine chain shaped foot lifter?

Thank you for your explanation. Due to space problem I also want to change motor and table. How can you solve opening feed plates without having table (without foot pedal how can I open feed plates) If you can share your project photos I will be glad to see

Thank you for your sharing such a valuable information. I have the same 45K treadle and a 45k25 machine, but no table. These photos explain many things for me . But I couldnt imagine the belt holes , How far from the edge of rightside? Could you please measure it if possible, I have also a missing part of support arm