Jump to content

Smileyfaces

Members
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

Profile Information

  • Location
    New Zealand
  • Interests
    Crafts

LW Info

  • Interested in learning about
    Patent Elastic machines
  • How did you find leatherworker.net?
    INternet

Smileyfaces's Achievements

Member

Member (2/4)

  1. Smileyfaces

    Hi Shoepatcher

    I have been chatting with Constabulary and he recommended getting in touch with you.

    I have a Patent Elastic boot patcher that is missing the shuttle. The rest of the machine is in good order as far as I can tell and I am keen to get it going. Would you possibly have or know of where I can purchase a small shuttle for this machine?

    Any help would be much appreciated.

    Regards 

    Smileyfaces

    1. shoepatcher

      shoepatcher

      ok  Can you measure the the open in the hook across it and the depth of the hook where the shuttle/hook goes?   Sorry  about the lateness of the response?   Send me pics of the machine please.

      glenn

    2. Smileyfaces

      Smileyfaces

      Hi Glen 

      Thanks for getting back to me. Above is a link to my conversation with Constabulary which includes photos of the machine. 

      The fence is 7mm high The shuttle area is 18.5mm wide. I don't have the depth at present and the machine isn't handy. I will have to wait until close to Xmas to get that measurement. Any help is greatly appreciated.

      Regards

      Clair

    3. Smileyfaces

      Smileyfaces

      Hi Glen 

      Thanks for getting back to me. Above is a link to my conversation with Constabulary which includes photos of the machine. 

      The fence is 7mm high The shuttle area is 18.5mm wide . I dont have the depth and will have to wait until xmas to access machine. I will let you know when I do.

      Cheers

      Clair

  2. Smileyfaces
    Thanks for your help
  3. Smileyfaces
    Thanks for your help.
  4. Smileyfaces
    Would you have any idea where I might get a shuttle for it? I have purchased a singer 29K shuttle but it is too big. Thanks
  5. Smileyfaces
    Hello Constabulary I have finally managed to get the measurements you asked for. Fence is 7 mm high and the diameter of the shuttle driver is 18.5 mm. Thanks
  6. Smileyfaces
    I will measure these, it will be a couple of weeks before I can organize this. Thanks
  7. Smileyfaces
    Hi Constabulary I dont have very good pictures and the machine is not handy at present. Not sure if these pictures are any use or not. Thanks
  8. Smileyfaces
    Thanks very much for the manual and the bobbin photos. They will be helpful. I don't think there are very many of these machines in New Zealand.
  9. Smileyfaces
    Hi I have recently purchased one of these Patent Elastic machines. Unfortunately I didn't realise the bobbin case and bobbin were missing. Is anyone able to suggest where I may get one from or does anyone have one they would be willing to sell? I would also like a copy of the manual mentioned earlier in this thread if that is ok? Many thanks in advance for any help that may be available. Regards Smileyface
×
×
  • Create New...