Old Navy

That sounds great.thanks

I have mostly tandy tools.I want to start buying Barry King tools.I need a good beveler to use on my belts.Could you suggest a tool? I am putting animals,fish,forest scenes on the belts.Thanks,Ron Parks

Hi,well after a visit from the industrial sewing machine mechanic,my machine had a loose screw in the top of the machine.I would be there forever trying to find the cause.So Iam75.00 lighter but it works fine.Well worth the money.When I dont know what Iam doing,I will call the man who does.Navy

I finely found the cause.It was a washer in the monsterwheel that was turned the wrong way.My thanks to the 2 people that tried to help me.navy

Hi,thanks for replying.I knew it might be the needle,so Iam turning it by hand without a needle.My leather is 2 plys of thin pieces.It has me baffled.navy Hi,thanks for the idea.I did not think of that.navy

Hi,I havent asked a question in quite a while.I have a 206 R consew.I oiled it good,took the belts off,left the top off,and the front cover so I can see what my problem is.There is no thread on the machine.I have a monster wheel on it.Iam turning the wheel in the right direction.and it goes smoothly for awhile and then I hear a thunk and it stops..I can back up for a couple of inches and it goes smooth a gain.Can you help?thanks,old navy

Thanks to everyone for your answers.I know how to cut it now.I bought my poly here. McMaster- Carr- Plastics

Hi, Iam making a poly maul.I bought a ft. long piece of white poly.I cut it with a sawsall which got hot and melted it a little in the saw cut.How do you cut yours?Thanks,navy

Hi,I havent been around for a while.Iam back to sewing hunting pouches.I oiled my sewing machine and wanted to run it for awhile.My hands got oil on them and I know I tried 10 times to put the bobbin in.Each time it slipped from my hand.or I dropped the part with the thread.I had a strong magnet to pick it up from under the machine.I set back and looked at it and I said there has to be a better way.I had the answer in my hand,I put the strong magnet to the bobbin and set it in there where it should be.We get to soon old and to late smart.navy --my machine is consew 206 R

Hi,I make leather hunting bags .I think you should use Dacron and or Nylon for making holsters.They will hold up better than any natural thread.I have bought a lot of things from these people.They wont cheat you and the price you see has shipping included.Old Navy http://www.brettunsvillage.com/leather/thread.htm

Thanks to you both.I will check everything you suggested.navy

Hi,Iam using 93 on top and 69 on the bottom of my consew 206 r portable machine.Its sewing ok ,but the top thread is so tight that it wont pull out when Iam at the end of a stich.Is there something that will make it slip more?The button is turned all the way out to its lowest number.Thanks,navy

I found one at springfield leather.navy

Hi,I got A Call Today From Sail Right To Tell Me They Were Out Of Monster Wheel Two.Does anyone know where I can buy one for my consew 206 R ?Thanks,Navy

Thanks,I think I understand enough to know what order now.Navy