alberta
-
Content Count
12 -
Joined
-
Last visited
Posts posted by alberta
-
-
what sewing machines are the best for general leather work I have a 29k and its good but small bobin . always runs out of thread at the wrong time . i seek the eperience and knowledge of all you folks who can point me in the right direction. i like treadle machines but modern electric would be great to.
-
thanks so much for the excellent tut. made one turned out great ,but only because of your help and generous sharing of info.
-
thank you for the help it is much appreciated
-
new to braiding , can anyone help with how to start a 4 strain round braid (no core) on a key ring , got the braid down pat but can't get of to a nice clean start
-
thanks steve
-
Hi Alberta
I have a Singer 29K table, and recently let another member have the dimensions and some pics. I've attached them here.
Measurements are as follows (in millimetres)
A=115mm
B=80mm
C=45mm
D=25mm
The length of the arm is 312mm (this is the short-arm version)
I have also traced around the inside of the slot, and the result is on the attached pdf. The file has been reduced to 50%, so if you print it out and photocopy or scan it to 200%, you should arrive back at original size (or just get the measurement back to 318mm by whatever means!).
Hope this is what you need.
Terry
(celticleather)
thanks terry for the great pictures they are very helpful
-
I would like to build a extension table for my recently purhased 29 k 62 .does anyone out there have a drawing or good pictures that i could refer to ?
-
what is the best thread size to use on a 29k62 and what is the heaviest thread this machine can run .
-
Im new to sewing leather with a machine and recently purchased a 29k62 .whats the best way to finish the stitching at the begining and end .
Chaps Versus Bibs
in Motorcycles and Biker Gear
Posted · Report reply
a lot of you who make for bikers also ride , so has anyone got experience with leather bib overalls in specific ones from Stone Lake Leatherworks , I do leather work but not on big garments , so why reinvent the wheel. if you know about there products please reply. I want American made quality .not interested in off shore, maybe one of you makes bibs let me know. thanks