tparrish

Vergez Blanchard 9/10 & 9/2 pricking iron set: SoldCS Osborne #151 1" oblong punch: SoldCS Osborne #154 1 1/2" strap punch: SoldCS Osborne #6 3/16" punch: SoldSheridan leather colt stitcher: Sold

Sorry everyone, I had forgotten about this thread but I do still have some of these items available.

@papaw - glad to hear! @tossik - sent you a pm, sorry for the delay

Offers welcome

Great, thanks!

The rest of the thread, needles, and beeswax are all SOLD. Anyone know how to edit the original post?

Okay, international members can PM me for additional shipping charges. Based on what I am shipping it may be an extra $5 or could be and extra $30.

The rest of the thread is sold pending payment...

Sorry for the delay, PM sent

Okay, well this is going off on a tangent. Please keep all other discussions private or find a new place for them. I am just trying to move my stuff for a fair price. On the Canadian shipping; the $18 charge was after the seller proposed to pay for half so actually shipping anything larger than a thimble to Canada with tracking was $36 minimum. So I ask (rhetorically), would you eat a $36+ shipping fee on a $120 sale?

I should have mentioned paypal for everyone in the original post but I don't see the option to edit it again. Also, Joe, check your private messages for tracking soon, thanks again! Even at 1/2 the price it is still very high. I did a price check with the post office and I believe the cheapest trackable option was $34-36. I just can't justify the $18 + 3% paypal charge for the price of the goods. Sorry it didn't work out ---- Anyways... I still have a lot of nice tools available so lets get these moving!

Thanks for the explanation 25b, like he said, just too much to justify shipping to Canada.

The 0.8mm and 1mm thread and the 2/0 needles are still available, thanks

Sorry, I can't ship to Canada, too expensive.

Tiger thread 0.6 mm creme and John James size 4 saddles harness needles SOLD Sending PM

I am quite firm on pricing right now, I think it's pretty fair.

Message sent to you, thanks

Have a bunch of tools I never got around to using for projects I had planned. We recently had a baby and I also started a new job so these are just sitting. All tools have NEVER been used, not even once. I can send more pics of each tool if needed as well. Vergez Blanchard 9/10 & 9/2 pricking iron set: $250 shipped Vergez Blanchard 38mm diamond awl: $20 shipped CS Osborne #151 1" oblong punch: $35 shipped CS Osborne #452 stitching chisel: $15 shipped CS Osborne #154 1 1/2" strap punch: $40 shipped CS Osborne #6 3/16" punch: $8 shipped Sheridan leather colt stitcher: $70 shipped Stakich premium beeswax 1lb: $8 shipped - SOLD Tiger thread 1.0 mm white 50 meters: $8 shipped- SOLD Tiger thread 0.8 mm white 50 meter: $8 shipped- SOLD Tiger thread 0.6 mm creme 50 meter: $8 shipped-SOLD John James 2/0 saddles harness needles (25 pack, best for 1mm thread): $7 shipped-SOLD John James size 4 saddles harness needles (25 pack, best for 0.6mm & 0.8mm thread): $7 shipped- SOLD More pics available upon request.

The weight I am looking to to this to is 2-3oz and 4-5oz.

Buying it isn't an option as I work with only chromexcel at the moment. I will take a look through the Gotz catalogue again, thanks

Hi Everyone, Thanks for the great replies. I have been thinking of a template, or like Dwight mentioned, make my own punch or die. I will have to check with Weaver as well. Laser cutting was a thought of mine off the bat but I am not sure if the edges my show discoloration, burning on lighter colors. I am located in St. Pet For durability I was thinking of doing this with lighter weights and using a second layer underneath. I don't believe the cross perfing penetrates the material fully either. Also forgot to mention that none of my perforated edges will ever by left unfinished. They will always meet another piece to for a seem. There may even be welting in between. I am designing somethings right now and it is difficult to get into the detailing of the design if I am not sure if a desired look is easily (relatively) obtained.

Hi Everyone, I am looking for a solution for perforating leather. I have searched and scoured the web and have only come across the Tandy option as well as the CS Osborne ventilator punch. I understand that large production rum perforating is most likely done by a large roller or other large machine but there has to be a solution for us little guys. So my question, does anyone have an idea or tool I can search for? I am looking to to smaller areas up to 10" x 10" in round perforations and cross perforations. Round: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Cross: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Machine is available and price is OBO. An FYI, it was an additional $400 to ship to me from the manufacturer, Canada to MN. My guess is it would be more the further away you are from the border.

I have one with 5 hours of use for sale. Send me a message if you are interestes.

That is my Techsew for sale. It has about 5 hours of use and lifetime warranty. Also just a heads up, shipping for my machine was $400 so keep that in mind. Good luck with the search!