lablevens
-
Content Count
15 -
Joined
-
Last visited
Everything posted by lablevens
-
70s Western belt
lablevens replied to lablevens's topic in Purses, Wallets, Belts and Miscellaneous Pocket Items
Thanks Tom -
Back in the 70s they made a western belt that was lace over the edges of the belt.The edges were puff out between wraps.Would like to know how they got this leather to puff out? .Don't know if puff is the right word. Thanks
-
Maybe roll was the wrong word to use.It would need to be ground down about 1/8 inch all the way around and then a new edge done.My grandson hit it just a little to hard.Update:I just spoke to the folk down in Texas and I'm going to have a clicker die made.Thanks for the reply
-
II have a 2 inch English End Punch that the edge has roll.Need someone to grind the edge down and put a new sharp edge on.Or would it be cheaper to just buy a new one? Thanks!!!
-
Found them on line
-
I/m looking for deer turkey bear print stamps.Size should be around 1/4 inch maybe larger.Thanks
-
This is my new rifle sling for my Marlin .I did the weaving on the upper part of the sling.The ends are buffalo and five weight leather for the straps.I have NO mechanical fasteners on it.It only took me three years to do this.But it's done.
-
I have a two inches English Point strap end punch and the edge has rolled in two spots.Is there someone around that could put a new edge on it? Thanks for the help
-
Here is two new slings I made this week.I did the weavening on the sling. The sling with black ends are buffalo and the brown one is cow hide.I built five last week and sold three.Was a good week.
-
Thank Troy I'll check them out
-
I check with Tandy here they do not have it.
-
Thanks KingX for the info.I'll start watching ebay
-
I'm looking for a copy of How to carve feathers" by Rob Barr in DVD Would like to start carving feathers.Thanks Lynn
-
Thank you much for the help and instruction
-
Need to find out how to make leather rounds and what tools do I need? Making a few rifle sling and would like to use the round on one end.Thanks