Lined Ruger LCP pancake holster and mag pouch

[Lined Ruger LCP pancake holster and mag pouch]

Great looking Holster !!  I really like the hidden belt loops, makes it look very clean and streamlined,

[Cobra 18 bobbin timing question]

Cowboybob,

You Rock!!!   You saved my butt, I had to get a wallet out today for a customer.  Your video was clear and concise.

Thank you

Richard

 

Epting Customs

[Cobra 18 bobbin timing question]

I have a bit of a problem this morning with my Cobra 18. I would call Steve but its Saturday and hope you guys can help before I call him on Monday. I started to sew a piece of 4 oz leather this morning and got a Bobbin jam. I cut out the thread jam and after that it looks like the shuttle set screws on the main shaft are loose and put it out of time.   When the needle comes down and passes thru the slot it hits metal and does not pass thru and pick up bobbin thread. I have no idea where to set the part with the set screw in relation to rotation of the bobbin shuttle. Any ideas? 

Thanks Richard

 

[2 Tone]

Josh,

  I have always like your work. very clean.

[Boot And Saddle Makers Roundup In Wichita Falls Tx.]

Another show is around the corner October 2-3 in Wichita Falls. Anyone going? I will be there on Friday.

Richard Epting

Epting Customs

[Boots And Saddle Show]

I will be there on Friday all day. This will be my 4th year to go. I stock up on a lot of stuff for the up coming year at this show.

[M&p Shield Holster]

Thanks for the complements. The dark piece is Black Shark.

[M&p Shield Holster]

I received a M&P shield for fathers day and needed a holster for it. Still needs a few tweeks here and there on the pattern for the next one but it came out fair. W&C 7/8 Chestnut with Shark trim. Thanks for looking Richard. www.eptingknives.com

[Technical Bush Craft Knife And Sheath]

Guys I used 6/7 Wickett & Craig saddle skirting. StrigaMort, Yes I am on Blade forums as well. That was one of my favorite knife sheath builds.

[New Round Knife Maker]

I talked to Josh as well at Blade show. He makes a very fine round knife. Very nice guy as well. Richard

[Some Exotic Skined Knife Sheaths]

Andrew,

sometimes depending on which area of the gator your using it can be a pain finishing the edges, I use Elmer's glue stuffed into any edge that is open or foamy. You can then edge as normal. Most of the time it edges fine.

Richard

[Some Exotic Skined Knife Sheaths]

Here are a few sheaths I finished up.

[Rivet Setter From Ebay?]

I received mine on Friday. It works great!! and a great price also. Thanks Sylvia for passing on this deal.

[Technical Bush Craft Knife And Sheath]

Thanks for the complements folks. Vaalpens I used the Chicago screws because they look nicer on the back side. Olds cool Yes I am the maker of the knife also. Thanks Richard

[Technical Bush Craft Knife And Sheath]

Its been a while since I have posted anything on the forum so here is a knife and sheath I did this summer. The knife is my Technical bush craft in S90v with Carbon Fiber handles. The sheath has a removable pocket that will hold various survival tools. Fire steel, Diamond hone, small compass and some small fishing line and hooks. It can be worn with the dangler or high ride on the belt. I used Wickett & Craig 7/8 saddle skirt. Thanks for looking Richard

[Wichita Falls Boot Abnd Saddle Show Coming Up!]

Hey Paul, It was good talking to you at the show. I too came home with a Cobra 18. I love that machine!! Took me while too get the hang of it, Different than the Class 4 for sure, but I love it. Also came home with a 10 ton clicker from Steve and my splitter comes in on Monday. Great show I look forward to it every year. Also some great deals from Jerry Vanamburg as well as others at the show. There are several shows in the U.S. like this show, If you are any where near one you should go.

[Latest Holster And First Paying Customer]

That looks great.

[Wichita Falls Boot Abnd Saddle Show Coming Up!]

Same here Robert, I will be easy to spot. I will be with my 80 year old father. We both will be wearing black shirts with Epting Customs logo. I would be great to meet some of you.

[Wichita Falls Boot Abnd Saddle Show Coming Up!]

Paul, I cant wait to get the splitter. Im most excited about it. I will be bringing a trailer for the Clicker Its a beast at 1500 lbs. I will hunt you down at the show and we can talk.

Rich

[Wichita Falls Boot Abnd Saddle Show Coming Up!]

I will be there on Friday and some Saturday morning. I get to pick up some new toys on Saturday from Cobra Steve. A cobra 14 splitter, 10 ton clicker press, class 18 flatbed sewing machine. I save all year for this show you can get some great deals. This has also become a yearly trip for my dad and I. He is 80 years old and looks forward to coming with me to the show. Mcbrides steak house is a must do for us as well.

[Cobra Class 14 Splitter: Day One Video, Plus Photos]

Yes thank you for the video. I saw the splitter in action in at the saddle makers round up in October. Its on my short list.

[Replacement For Barge Cement]

Ditto what Art said. Been using masters for a year now. I like it better than barge.

[Weaver Crank Splitter]

I got to see the new 14 inch splitter form Leather machine Co. this past weekend at the saddle makers roundup in Wichata Falls. This thing is awesome and on my list to buy this year. I think its around $1950. It cuts very nice and smooth.

[2012 Wichita Falls Saddle Makers Round Up]

Thigpin, you are correct 5-6 of October Friday, saturday show.

[2012 Wichita Falls Saddle Makers Round Up]

The show is coming up in a few weeks October 4-5 Im planning on going Friday. Anyone else?