kevinamc

Hey everyone I'm looking for an easy to purchase from supplier or wholesaler of athletic shoe soles in white. I did a quick search through the forums and couldn't find anything. Thanks in advance for any input Kevin

Hey again everyone been busy with other things and just got back to this, should i literally be lifting it out of the machine? should i be removing the hook that is secured by a flathead screw on the right side of the opening to the bobbin case?

So i have removed the 2 screws that are pictured above, and the plate appears to move left and right fine but i cannot life it out of the machine. Where am i going wrong here? thanks in advance!

Thanks a million for the info! you have all been a huge help in getting me back behind the machine

thanks for the info! ill have to investigate the removal and installation of the bobbin case as everything else appears to be in order. is it a difficult job?

and now i can't seem to turn the hand wheel at all its extremely jammed up or something

Hey everyone, just started doing some sewing on my day off and I'm finding when i try to bring the bobbin thread up through with the needle it doesn't wind properly and wraps around the bobbin case it is super frustrating and i can't figure out whats going on. I also noticed that my bottom stitch acts up occasionally and bulks up or doesn't complete at all, i am thinking the issues are related. Just looking for some advice so i can get back to working. Thanks for your time! Kevin

Thanks a lot Bob! Im still having a little trouble getting the bobbin thread around the projection though, any tips?

Hey everyone, I am brand new to sewing leather via machine, I had to opportunity to pick up a good condition 111w155 for a decent price. Now I am just looking for the proper instructions for threading it and winding/loading the bobbin. The machine i got comes with the original bobbin winder on the side of the table. I did some light research and came up with partial manuals and parts lists but nothing walking me through the actual threading of the machine. Thanks in advance for your time and input. Cheers, Kevin