piera

Well i did so much testing on it yesterday.. I went from an 18 to A 22 I hadn't interfaced yet.. Once i applied interfacing the stitching came out all around better.

Oops forgot to publish album! Here are the pics! Top Bottom

Hello all, I'm attempting to make handbag using red patent vinyl. I sew with Juki 1541s.. i am just testing ons crap before I proceed to my actual bag. My top stitching is fine but my bobbin stitching is loose.. I've tried different combinations of tightening or loosening the bobbin tension or top tension. Im using 69wt nylon bonded thread with size 18 needle Any other suggestions? Thanks so much!

Thank you both for your help! I threaded it and it's working perfectly

It works it works it works! I pushed that support plate to be in hook cause it was off and it works!!! Thank you SOOOOO MUCH! I'll have to thread it now and test it and get back to you if it's good to go But least my bobbin is turning now!

Hi Gregg.. do you do house calls haha I looked into your store to buy my machine but you didn't have financing i was looking for with my Sewing and More Card :\ Im so clueless about how to fix this.. I just wish I got the machine without the safety mechanism.

Thank you Eric! I don't see anything on my machine for it to cause such issues. Here are the pics Forgive my ignorance but which part would be the lower shaft (I'm new to this)

Hi all, New to this forum.. I have a Juki 1541S... Have had this machine for about a month now.. I know how to disengage the safety clutch. Now when I try to disable the safety clutch even if i rotate my hand wheel away from me nothing is turning and my safety clutch button doesn't go all the way down. I don't know what else to do.