Jump to content

srgrimes

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by srgrimes

  1. That's what I asked for at Tandy but they "the clerk" didn't quite understand. He gave me " Concho Snap Adapter Screws with Washers. The washers wont go around a Concho shaft. I made my own washer from scrap leather. There is in a photo in my album.
  2. I made one with a simple snap and then tried one with a Concho/Snap combo. I didn't know what to do so I created a leather "Washer" to fill the long shank space. I also made the mistake of positioning the Strap across the back instead of the front.
  3. From the album: S R Grimes

    This was impossible to find at Tandy and what they provided only worked for Button's. In the next photo you will see that I created a Leather Washer to work as a spacer on the Concho Shank.
  4. From the album: S R Grimes

    This Sheath was created by sieving the end of the Loop and tucking it inside, then double stitching it. A concho/snap combination was impossible to find at Tandy. What they provided to me when I asked, worked for Button's but not for Concho's. In one photo you will see that I created a Leather Washer to work as a spacer on the Concho Shank.
  5. From the album: S R Grimes

    Loop is tucked inside and double stitched through.
  6. From the album: S R Grimes

    This was impossible to find at Tandy and what they provided only worked for Button's. In the next photo you will see that I created a Leather Washer to work as a spacer on the Concho Shank.
  7. From the album: S R Grimes

    Loop is tucked inside and double stitched through.
  8. From the album: S R Grimes

    © S R Grimes

×
×
  • Create New...