Jianis

Bert Did not manage to get a better picture will try again with daylight !

My reserve helmet liner needs some tidying up. I consider using real leather. Do you have any suggestions about the kind of leather and thickness? I made a forum search but did not get any results. Thank you in advance

Thank you. I sure get your point. It seams to be a very big price difference !! The machine in question has only 5 mm distance between the needles. I guess I have to wait until a more suitable machine comes for sale

Thank you I only should use it for the double needle. I have got a Singer 111 W 152, a Pfaff 145 H2 with extra piping and zipper feet, a really heavy-duty Adler 4-10, and a small collection of lighter machines. The machine in question is coming with a rather small 5mm dinstance between the needles so I guess I have to search out if it is possible to change to a wider system

Hello everyone. There is a Pfaff 142-6A S double needle machine for sale. I am considering buying it as I am making a leather interior for my classic car. Does any of you have information and advice if the machine is good enough for leather? and points that I should be aware of. Thank you in Advance.

Thank you . A lot of usefull information in one document. Back in the 70s I had the theory in college and I even got a deviding head and 2 sets of gear cuting discs to experiment on my Myford lathe with milling attachment. At the time I made two gears on coper disks and then I forgot all about it. Jianis

Thank you ! Lots o useful information. thIt is a German machine so it should be metric. I am a couple of thousand miles away from home so it will be some months before I can work on the machine again! The gear has some 50 teeth.I can eventually calculate the number of teeth of the smaller gear measuring center to center between the the gear itself and the center of the back-gear bracket. Then find out the kind of gear and go further…. Jianis

It has got only the big gear and a bracket for a shaft (?? ). Now that you mentioned it I might be able to find some parts in the future. At the moment I cannot do anything as I am away for a few months so I only can do some research for finding parts. Helical gears is a good idea if you have the means to make the needed setup. In the mea time I will be *torturing* the forum with questions about a totally worn out Singer 29 D 60 that I just pulled out of the cellar of my summer address ( 35+ years ontheven waiting list ). Do you have any photos or relative information on the back gear that was used by the Adler. Thank you! Jianis

For now and till I get some parts for my Singer 111W.. it will stay as is and I will work on some minor issues dat need to be solved. Jianis

Thank you Constabulary The machine is massive and heavy. I got it only to use the frame and foot wheel to set up my 111W Singer, I did not know the size !! It is equipped with a huge clutch motor. I did not expect it to work but it does it only needs some work on the thread tension spring and the bobbin case. It has a max stitch of 11 mm. Jianis

Hello again. One more question: Is anyone familiar with the Adler 4-10 industrial sewing machine? I am searching already for some time but there is nowhere any information. Jianis

Thank you Uwe!

Tor I am new on working on sewing machines so I first have to find information how to lower the feed dog. I see we have the same interest on vintage Volvos! Jianis

Thank you Tor. I will follow your advice and lower the feed dog see if it makes a change. I used thick colored thread on top only to schouw how I thread the machine (Costabulary asked ) . I am using Tex 70 polyester thread and new 110/18 needles Jianis

Grat Now I can date my 111-W-152 back to 1951