MtlBiker Report post Posted November 14, 2022 I think I've been oiling my machine properly, perhaps even over-oiling it (better safe than sorry), but after having some service done I noticed there is a wick under the machine on the right side that seems to end just hanging... like in the air. It doesn't look right to me but I can't see where it should be attached or tucked. Does it look correct to you folks or should be be somehow reattached? Thanks! Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted November 15, 2022 On 11/13/2022 at 7:08 PM, MtlBiker said: I think I've been oiling my machine properly, perhaps even over-oiling it (better safe than sorry), but after having some service done I noticed there is a wick under the machine on the right side that seems to end just hanging... like in the air. It doesn't look right to me but I can't see where it should be attached or tucked. Does it look correct to you folks or should be be somehow reattached? Thanks! On the front there's 3 oil holes marked red,the 2nd one down on the rightside has a tube with an oil wick in it that wraps around the top of a bushing,somehow it got unwrapped & fell down.Try to follow it to the other end & you'll see where it comes out of the tube. Quote Share this post Link to post Share on other sites
MtlBiker Report post Posted November 15, 2022 @CowboyBob - Thanks very much! I'll take a closer look tonight when I get home. Yesterday I didn't see anything that looked to me as being wrong. Quote Share this post Link to post Share on other sites