JonesCoLeatherworks Report post Posted April 9, 2023 Looking for anyone with experience in laser mirrors? Problem is between mirror 2 and 3, no power. Plenty of tape burn from 1 to 2, but when I pulse nothing gets from 2-3 and the pulse is unmarkable on paper or tape. Any clues would be helpful. Will be replacing mirrors, but I have cleansed the mirrors, realigned up to 2, but not enough power from 2-3 to check alignment. Thanks in advance. Quote Share this post Link to post Share on other sites
Bert03241 Report post Posted April 10, 2023 19 hours ago, JonesCoLeatherworks said: Looking for anyone with experience in laser mirrors? Problem is between mirror 2 and 3, no power. Plenty of tape burn from 1 to 2, but when I pulse nothing gets from 2-3 and the pulse is unmarkable on paper or tape. Any clues would be helpful. Will be replacing mirrors, but I have cleansed the mirrors, realigned up to 2, but not enough power from 2-3 to check alignment. Thanks in advance. I would say an alignment problem . If you really want help go to the laser section on Sawmillcreek these guys know lasers and I'm pretty sure they will have a better answer for you. https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Quote Share this post Link to post Share on other sites
