AlZilla Report post Posted June 1, 2023 (edited) Just showing off here. I've been tinkering with this machine on and off for close to a year. Used the clutch motor for a while and it now has a 550watt servo and a speed reducer. I counted 56 stitches in 60 seconds at my slowest speed. Here it sewed a single layer of fairly hard 3.8MM veg tan and then 2 layers. A shade over a quarter inch. It griped a little on the thicker piece. I still need to look at the feed dog height and adjust the walking foot lift height. And, obviously, a pressure issue if I want to sew 6.8mm. I'll keep this one threaded with 138 top and bottom. Edited June 1, 2023 by AlZilla Quote Share this post Link to post Share on other sites
Lori58 Report post Posted May 19 I just picked up a 111w153 yesterday. Can not wait to play. That is a gorgeous stitch. Quote Share this post Link to post Share on other sites
AlZilla Report post Posted May 23 On 5/19/2024 at 12:40 PM, Lori58 said: I just picked up a 111w153 yesterday. Can not wait to play. That is a gorgeous stitch. Congratulations on the new machine! Is it ready to sew or a fixer upper? Quote Share this post Link to post Share on other sites
Lori58 Report post Posted May 23 It needs a deep cleaning. Gunky underneath, but I'll have the machine cleaned and oiled this weekend! At the moment it has a Yamata clutch motor/max 1725 RPM. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted May 24 servo motor time!! glenn Quote Share this post Link to post Share on other sites
