Golf clubs figure carving?

[Cattleman]

So I have a potential new client that is interested in one of the golf ball sleeves I have been making... But he is not really a western kinda guy... He wants golf clubs and/or other golf things tooled on the sleeve. I have never done any figure carving... So I'm a little at a loss.

Can anyone please give me some direction on how to proceed. Or maybe even some tooling patterns (if they even exist). Many thanks in advance.

Edited September 26, 2023 by Cattleman
Typo

[Simplejack1985]

Just find some old tandy golf stamps. They have to have made some.

[fredk]

1. I had a brass stamp made for use on the Tandy golf ball caddy

2. another source is Letter Press printing plates. They'll press into wet leather but their impression is sometimes quite shallow

https://www.ebay.co.uk/itm/183843967587?hash=item2acdf45263:g:0ZoAAOSwBZdc~3rA&amdata=enc%3AAQAIAAAAwM5Mlog5MsEvfpa34K%2F9ePD4XiOMrWp72E0FDEOPsAQ8LjxDPq37P%2B5Ggu6tLVCCij0Iwd2UhereOjOqavBk3FJgIuRD76t%2B3vfUEQgPdsn%2BQKeVM3RqoNVVlB4LX5G6Y4Htk4qzyZK8pbgnUJFPIcEbOC%2F5A2WlvhpEmJRjkh12WIm%2FyCMOF%2BGXfwZhPTqPLhEyVUuhwM3P6sdnrSBjB2YLSHl%2FE%2B03toMbA7CYBWikum6jLfnds7ScaCBNO0u%2Fkg%3D%3D|tkp%3ABk9SR9L3xoPaYg

 

https://www.ebay.co.uk/itm/155226939158?hash=item24243f1f16:g:qAkAAOSwfDFjWpv~&amdata=enc%3AAQAIAAAAwHBjITvnAuy3K4vsDinrXXWWnW6YltRmETrIZyioM43hVoYGc5GFQcFt4I5FQKIFTQ9kJ9JQGScqSyhnODHp8k%2FSSYkLNC5tfrGvx8lYcvvATiLJBJOYv57vXxRxHpHHo1ypkHLU1%2B4QOswmgazXe6eesJn3nBBLso1sy82JPeaZyMDcUuXEvmcPiw6QuFOCUQiQdPYEAkb7I2UE8yekq1zEYXL%2BjRHy1a2H%2Fa7tQVdqk5fe5C4DSuFs9NXhxoUzdQ%3D%3D|tkp%3ABk9SR9L3xoPaYg

hth