bruce johnson Report post Posted November 27, 2007 As some of you know, I am the board president of out local cowboy museum. We were recently contacted by an older maker who wanted to donate some of his work. We get these requests from time to time, but this one is different. This guy is from North Dakota, and his shop is 6x10 with bars. He is 76 years old, and he won't be changing shops. He is limited on tools obviously. This first saddle he sent us has a 2-3/4" seat and a 7/8" gullet. He based it on the California equitation seat western saddle. Obviously his tooling is a bit large, but he is working with what he has, and I am sure age is a factor too. He made everything but the hardware. He wove the cinch and made the stand. Everything pretty well lines up the way it should, and is to scale. We have quite a few saddles from different makers, and are glad to have work from this maker too. I attached some pictures. Quote Share this post Link to post Share on other sites
rdb Report post Posted November 27, 2007 It looks ready to ride!.. Every human has a worth. Quote Share this post Link to post Share on other sites
JustWakinUp Report post Posted November 27, 2007 oh very cool. I came across some of these saddles on another site just earlier today. I was shocked at the quality they were able to achieve with limited tools. As for time they had way more than i do. Quote Share this post Link to post Share on other sites
Duke Report post Posted December 4, 2007 not bad at all for a breyer horse saddle. Quote Share this post Link to post Share on other sites
K-Man Report post Posted December 4, 2007 Are the maker's initials, "V. E.?" I was recently contacted by a person from the same locale showing samples of his holster-making work. Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted December 4, 2007 K-man, His initials are V.E.A. We just got another one yesterday with a little scabbard, so he may do holsters too. Quote Share this post Link to post Share on other sites
