Billfromnc Report post Posted March 15, 2024 I ordered a consew needle position sensor for my singer 111w151. I know I have to tap a hole in the side of the machine, but the bolts they send for the flywheel (hand crank)wont fit. The original one is to short. Does any one know what size the flywheel bolt is? The reason I'm asking is I've heard some of the bolts on these old singers are not regular sizes? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 15, 2024 We have this screw in stock Singer#200006 17/64 x 24tpi.It's 3/4" long Quote Share this post Link to post Share on other sites
Billfromnc Report post Posted March 16, 2024 Hey CowboyBob, I got the needle positioner working. I had to cut off the end of the plastic spacer to get the short screw to fit. I sure appreciate your help though. I don't know what I'd do without the forum. I just got my machine and don't know much about it but all the questions I've had everyone had been able to answer. Thank you! Quote Share this post Link to post Share on other sites
