Jump to content

Anyone with experience using a Strobel stitching for insoles on footwear?


Recommended Posts

  • Members
Posted

I’ve been learning to make replica Nikes/Jordans using the lasting board and tack method but have become more interested in speeding up the process and notice that most shoes these days are manufactured using the Strobel method. 
 

I can’t seem to find a lot of information on them or heck where to even buy them beyond Alliexpress.

many thanks!

 

 

 

  • Members
Posted

well, check with the manufacturer and ask where to buy.

https://globalsew.com/strobel/

or

https://globalsew.com/strobel/

~ Keep "OLD CAST IRON" alive - it´s worth it ~

Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2

  • Members
Posted
18 hours ago, Constabulary said:

well, check with the manufacturer and ask where to buy.

https://globalsew.com/strobel/

or

https://globalsew.com/strobel/

I understand that Strobel is the brand name, like Kleenex is for tissue, but are there any other vendors or manufacturers that you’re aware of? The only thing I found that wasn’t a Chinese knock off was from Techsew but it says it’s for Fur. Not sure if this would work for insoles, but I did message them. 

 

 

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...