Anyone with experience using a Strobel stitching for insoles on footwear?

[Ajlchase]

I’ve been learning to make replica Nikes/Jordans using the lasting board and tack method but have become more interested in speeding up the process and notice that most shoes these days are manufactured using the Strobel method. 
 

I can’t seem to find a lot of information on them or heck where to even buy them beyond Alliexpress.

many thanks!

 

 

 

[Constabulary]

well, check with the manufacturer and ask where to buy.

https://globalsew.com/strobel/

or

https://globalsew.com/strobel/

[Ajlchase]

18 hours ago, Constabulary said:

well, check with the manufacturer and ask where to buy.

https://globalsew.com/strobel/

or

https://globalsew.com/strobel/

I understand that Strobel is the brand name, like Kleenex is for tissue, but are there any other vendors or manufacturers that you’re aware of? The only thing I found that wasn’t a Chinese knock off was from Techsew but it says it’s for Fur. Not sure if this would work for insoles, but I did message them.