Protecting / Preserving Gilded Embossing

[sign216]

I found this vintage folding ruler, that I carry with me daily to confirm measurements.  The gilded stamping about the automatic coal stokers adds real character, but I don't want it to wear away. 

Is there a wax, shellac, or other finish that will protect it from wear?

 

 

[chuck123wapati]

That is cool !

you might try resolene it is a leather sealer. It may harden or change the color of the case a bit so definitely try it or any product you go with on a something else similar before committing.

[sign216]

Chuck,

I looked up Resolene, and it sounds like a good application.  Thanks, I'll give it a try.  

Joe

[toxo]

13 minutes ago, sign216 said:

Chuck,

I looked up Resolene, and it sounds like a good application.  Thanks, I'll give it a try.  

Joe

Remember to dilute it 50/50 with water. You can apply 2/3 coats letting it dry in between. It will put a shine on it.

[sign216]

Toxo,

Thanks for that tip.  I'll probably do 3 coats, just to maximize the protection. 

Joe