Lakil7 Report post Posted May 17 Hello Forum, hope you are well. I have a n Adler 30-1 that has been sewing beautifully, but now it is skipping stitches on the top thread. Does anyone know why this might be the case. Hoping to get some feedback. Thank you Quote Share this post Link to post Share on other sites
Constabulary Report post Posted May 17 needle not correctly insert, worn hook tip, needle - hook timing needs to be checked & adjusted (see manual), hook tip too far away from needle... there could be many reasons. Quote Share this post Link to post Share on other sites
Northmount Report post Posted May 17 Not enough presser foot pressure if the leather is lifting the foot on the needle's upstroke is another cause. It destroys the loop the hook is trying to grab, skipping a stitch or multiple stitches. Quote Share this post Link to post Share on other sites
Lakil7 Report post Posted May 17 Thank you guys so much for the insight. I'll see if can apply your ideas to trying to remedy the problem, and post what my results were. Much appreciated. Quote Share this post Link to post Share on other sites