Members Rock76 Posted January 15, 2009 Members Report Posted January 15, 2009 Hello Everyone, I'm new to the forum and REALLY appreciate all the great info I've found here since I joined. Great place! My question is; I've just recently started spraying resolene for my finishes and was wondering what is the best method for cleaning up your airbrush after you're finished? I've been running warm water with a drop of dishsoap through the brush until it sprays clean, is this ok? Thanks. -Adam Quote
Members Windy Posted January 16, 2009 Members Report Posted January 16, 2009 Hello Everyone, I'm new to the forum and REALLY appreciate all the great info I've found here since I joined. Great place! My question is; I've just recently started spraying resolene for my finishes and was wondering what is the best method for cleaning up your airbrush after you're finished? I've been running warm water with a drop of dishsoap through the brush until it sprays clean, is this ok? Thanks. -Adam Adam, When I clean my air brush , I always clean till it runs clear then I hold my finger or a tightly wrapped rag over the tip to create back pressure to make sure you get all the gunk out.Then repeat the entire process. WINDY Quote
Members Shorts Posted January 16, 2009 Members Report Posted January 16, 2009 The warm water and a dash of soap is what I use as well. I don't really like disassembling the airbrush every time but if I don't, it will not get clean and cause me grief the next time I go to use it. Quote
Members Rock76 Posted January 16, 2009 Author Members Report Posted January 16, 2009 Thanks guys. I thought it would be fine but I just wanted to be sure. -Adam Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.