zuludog Report post Posted 11 hours ago I've made leather sharpening strops before, and have simply loaded them with green chromium dioxide stropping compound and away we go and not had any problems But I've been idly Searching YouTube and see that some people oil or grease the leather before applying compound - so which is it, please, to grease or not to grease? Quote Share this post Link to post Share on other sites
billybopp Report post Posted 11 hours ago 6 minutes ago, zuludog said: I've made leather sharpening strops before, and have simply loaded them with green chromium dioxide stropping compound and away we go and not had any problems But I've been idly Searching YouTube and see that some people oil or grease the leather before applying compound - so which is it, please, to grease or not to grease? If you're using stick form compound, it doesn't really matter - I don't oil tho. Oil/grease is helpful if you're using a dry powdered compound. - Bill Quote Share this post Link to post Share on other sites
zuludog Report post Posted 11 hours ago 8 minutes ago, billybopp said: If you're using stick form compound, it doesn't really matter - I don't oil tho. Oil/grease is helpful if you're using a dry powdered compound. - Bill Thanks; I use a stick, so I'll carry on without grease, but I might just make one with a slight amount of grease and see how it goes Quote Share this post Link to post Share on other sites
Arturomex Report post Posted 9 hours ago I also use a green compound stick but I oil very, very lightly before the first application. I think it helps me apply the compound better but it's the only time I oil. I think Bill might be right and the efficacy of my oil application might just be in my head. I'm going to make another strop without oiling and see how it works. Not to teach grandma to suck eggs but I use the thinnest veg tan I can get, (0.5 ~ 1.0 mm) wet it, let it dry thoroughly and then glue it to the board (2.5 X .75 in. oak). I'm looking for the hardest surface I can get with minimal give to minimize any profile distortion. I pretty much only use Japanese knives on veg tan these days and they love the strop. Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted 5 hours ago My thoughts are that it depends on the compound and maker. I have found that within the green, black, and white colors there are variations between makers. One suppliers green can be greasy and spread and stick well to anything. Another maker’s version can be chalky and dry. Those do better with oiled leather. I found a maker that I like for wheels and strops and stay with them. Quote Share this post Link to post Share on other sites