Members ibrahim Posted February 25 Members Report Posted February 25 Hello, I am sewing back to finish after sewing straight with the Durkopp Adler 269 sewing machine, but the thread gathers at the bottom and the straight stitch distance and the back stitch distance are not the same. I am opening this title because it was suggested that I open a new title for this situation. I need your solutions and suggestions about this problem. With my respects and greetings İbrahim Öztürk Quote
Northmount Posted February 25 Report Posted February 25 On 2/25/2025 at 8:29 PM, ibrahim said: I am sewing back to finish after sewing straight with the Durkopp Adler 269 sewing machine Expand Moved your post to leather sewing machines where the machine guys hang out. Help wanted also requires approval of all posts by moderators. Quote
Members ibrahim Posted March 19 Author Members Report Posted March 19 I solved the problem thank you. Quote
Northmount Posted March 19 Report Posted March 19 On 3/19/2025 at 12:28 PM, ibrahim said: I solved the problem thank you. Expand Tell us how please! Quote
Members ibrahim Posted March 23 Author Members Report Posted March 23 I applied durkopp adler 269 maintenance procedures step by step and the problem was solved. The maintenance procedure is not difficult, only at first there is a fear of breaking all the settings, but when you start, you want to continue and see the effect on the result. I was relieved when the improvement started. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.