Members MelissaViarengo Posted 22 hours ago Members Report Posted 22 hours ago Hi everyone! Recently I bought online this Singer 29k1 sewing machine but there is a problem. As I start sewing the presser foot won't pull back the fabric underneath it, basically it turns out that the machine sews in the same point. Can somebody help me out? I will post a link with the photos. Also I noticed that the bar with the stitch length doesn't have numbers and signs on it regulating the length. Quote
Members Constabulary Posted 20 hours ago Members Report Posted 20 hours ago Hope this helps 😉 Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members MelissaViarengo Posted 4 hours ago Author Members Report Posted 4 hours ago Hi! I fixed the tab and I will post pictures but It still doesn't take back the fabric, I tried with two layer of leather and also with only one but it still has this issue. Also I don't know if it has to be like this but the tab moves if I push up the bar with my finger. I don't know if it's also part of the problem but even if it was screwed in the previous position that was incorrect, the tab moved free as I moved with my finger. Also the presser foot is up in the photos. Quote
Members Constabulary Posted 3 hours ago Members Report Posted 3 hours ago (edited) you probaly have chosen a short stitch lenght or the bell crank lever is worn down (or both). Maybe teeth on the presser foot are dull / worn down. Also theck if the "gib" on the stitch lenght adjuster is installed correctly. See pictures here: Edited 2 hours ago by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.