Members IMK Posted 13 hours ago Members Report Posted 13 hours ago (edited) Hello everyone, I am cleaning an Adler 5-27 and I was wondering if it is possible to remove the jump foot? I have removed all the screws, but I can't get it to move a mm. 😅 My guess is that the pin that is visible in the second picture is stuck through the rod. As I don't own the manual I was hoping somebody here is able to help me! Kind regards, IMK  Edited 13 hours ago by IMK Forgot to add topic Quote
Members Constabulary Posted 3 hours ago Members Report Posted 3 hours ago (edited) you have to pull out the foot bar. You have to loosen / remove theses 3 screws too - see rec circel. Alos make sure you removed the return spring that pulls back the presser foot (not meaning foot pressure spring) Edited 3 hours ago by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.