CREALTY 40W LAZER AND CUSTOM ENCLOSURE

[ferrissteve]

I've got a new 40W Crealty Lazer Cutter/Engraver.  I also have a custom metal enclosure made specifically for this machine.  Also comes with a better/updated honeycomb tray.  I've got 1500 into the whole setup - was never used as the project went a different direction.  1050 shipped CONUS (these are somewhat large boxes).  Would also meet buyer in person - located in KC, MO.  Unit was opened to look over but never turned on or setup.  Its for all intensive purposes brand new. 

Steve 

[Northmount]

On 9/25/2025 at 8:29 PM, ferrissteve said:

new 40W Crealty Lazer Cutter/Engraver. 

Some photos and manufacturer's specs would be very helpful.

[ferrissteve]

Here's a link to the lazer from the manufacturers site: 

https://www.crealityfalcon.com/products/laser-engraver-cutter-falcon2-40w-engraving-machine

 

Link to enclosure:

https://www.etsy.com/listing/1354212243/laser-engraver-enclosure-includes-all?ref=yr_purchases

 

And a link to the enclosure instructions: 

https://static1.squarespace.com/static/5ff105a30400f40890082114/t/671e5148325b0b69be92a256/1730040139458/Makergadgets+Professor+Instruction+Manual.docx.pdf