Members billymac814 Posted November 16 Members Report Posted November 16 Hello, I have a few machines I’m ready to part with. Cowboy 4500, comes with the whole accessory package with the table and a bunch of feet, lots of extra bobbins and I have thread that’ll go with it in white, black, brown, red etc. also plenty of needles. Has the gear reduction and DC servo motor. Hasn’t been used all that much. New price is about 3400 w/acc package. $1900.00 Consew 206-RB-5. With Servo motor, several feet sets, bobbin, some thread. Thread stand(not pictured). Also not really a ton of usage, table is stained a bit from dye and cement, would probably clean up with some thinner. New price is 1795.00. $950 Last one I’m still debating on letting it go. It’s a Textima patcher which is a rebranded Claes 20. It’s got the good gear reduction motor, I also have 5 extra shuttles which are crazy expensive. Currently mounted to a rather cheap stand but I also have a treadle base for it. New ones are close to 7k. $2300 I also have a Skiver machine I’m going to post in the other section. It’s a dual feed bell sliver w/servo from Toledo Machine, not sure what the new price is on that but I’ll take $600.00 Located in Altoona Pa. www.mccabescustomleather.com
Northmount Posted November 17 Report Posted November 17 8 hours ago, billymac814 said: Hello, I have a few machines I’m ready to part with. You need to state shipping info. Will you ship, where to, who pays?
Members billymac814 Posted November 17 Author Members Report Posted November 17 1 hour ago, Northmount said: You need to state shipping info. Will you ship, where to, who pays? I can’t seem to edit the post on my phone. I’ll try from a computer tomorrow. I’d prefer not to ship but I will if someone wants to pay for it, any of these will have to go LTL, I do work in a warehouse so I can accommodate palletizing any of them. www.mccabescustomleather.com
Northmount Posted November 17 Report Posted November 17 10 hours ago, billymac814 said: I can’t seem to edit the post on my phone. I’ll try from a computer tomorrow. The "Edit Window" times out after a few hours, from what I see, seems to be between 2 to 5 hours. So the best way is to just add the info in a new post in the same thread. Other option is to ask a moderator to make the changes to the original post. Need to provide the wording to be changed/inserted.
Members billymac814 Posted November 20 Author Members Report Posted November 20 On 11/17/2025 at 10:53 AM, Northmount said: The "Edit Window" times out after a few hours, from what I see, seems to be between 2 to 5 hours. So the best way is to just add the info in a new post in the same thread. Other option is to ask a moderator to make the changes to the original post. Need to provide the wording to be changed/inserted. I made a new post to add that info and lowered the prices some but now I can't figure out how to delete this one. www.mccabescustomleather.com
Northmount Posted November 20 Report Posted November 20 1 hour ago, billymac814 said: I made a new post to add that info and lowered the prices some but now I can't figure out how to delete this one. All you had to do was add the info in the SAME thread, just like you added this comment. Members cannot delete a post or the complete thread.
Recommended Posts