can anybody please help me find this "sole trimmer"?

[TakashiOkada]

I don't know the correct name of this part in english but I need to replace it and I can't find anybody that sells it in my country so I'm looking to buy it online from the US, europe or china. can't google it because I don't know how it's called. 

https://www.ebay.co.uk/itm/380810963466   This is what I've found but I need number 5, not 7.

 

[kgg]

10 hours ago, TakashiOkada said:

This is what I've found but I need number 5, not 7.

You probably get better help if you listed the manufacturer of the machine.

kgg

[TakashiOkada]

4 hours ago, kgg said:

You probably get better help if you listed the manufacturer of the machine.

kgg

sorry, here are some pictures. 

[kgg]

24 minutes ago, TakashiOkada said:

sorry, here are some pictures.

The photo with the nameplate info appears to be for the motor which was made in Croatia. The wording "tvornica elektricnih strojeva subotica" converts to say "Electrical Machine Factory, Subotica". I would send your photo's to USM ( https://usm-americas.com ) and see if they could match up something.

kgg

[TakashiOkada]

2 hours ago, kgg said:

The photo with the nameplate info appears to be for the motor which was made in Croatia. The wording "tvornica elektricnih strojeva subotica" converts to say "Electrical Machine Factory, Subotica". I would send your photo's to USM ( https://usm-americas.com ) and see if they could match up something.

kgg

thank you! 🙌

[Tastech]

@TakashiOkada Your internal measurements almost correspond to a Landis blade. I am getting the measurement of 19.4mm on the internal on my landis blade . 

Search for Landis or Sutton . They are interchangeable . I believe the British machines also take the same blade measurements .

Now lets talk about saftey of your machine or lack there off .That blade needs a safety guard. You are one slip away from losing a finger and thumb . I saw it happen 30 Years ago to a co worker . His hand was a mess and he never worked again . Just looking at your machine gives me PSD and makes me feel weak in the stomach . Please do something about it .Please   

[TakashiOkada]

13 hours ago, Tastech said:

@TakashiOkada Your internal measurements almost correspond to a Landis blade. I am getting the measurement of 19.4mm on the internal on my landis blade . 

Search for Landis or Sutton . They are interchangeable . I believe the British machines also take the same blade measurements .

Now lets talk about saftey of your machine or lack there off .That blade needs a safety guard. You are one slip away from losing a finger and thumb . I saw it happen 30 Years ago to a co worker . His hand was a mess and he never worked again . Just looking at your machine gives me PSD and makes me feel weak in the stomach . Please do something about it .Please   

so, blades for landis, this could definitely help me find it.

wow I had no idea this machine should have a guard. I'll check tomorrow if It has some slot or hole to screw one onto the rod or some other way to install it. let's hope I can use a landis guard as well. thanks!