Members Guell Posted January 15 Members Report Posted January 15 I am wondering if anyone has any experience with the Yuki LZ 2280 I'm trying to set the height on the feet dogs but I have a lot of play going up and down. I red in the engineering's adjustment guide that you must press it in the direction of the arrow or the washer will fall out costing play but I have not been able to find an arrow or a washer however I do have the play how can I get rid of it please help me. VID_20260110_144542591~2.mp4 Quote
Northmount Posted January 15 Report Posted January 15 46 minutes ago, Guell said: I am wondering if anyone has any experience with the Yuki LZ 2280 I moved your post to Leather Sewing Machines. You'll get more help here. Help wanted is more for hiring someone to do a job. Like the classifieds in a newspaper. Help wanted also requires all posts to be approved by a moderator. Quote
Contributing Member friquant Posted January 15 Contributing Member Report Posted January 15 Perhaps the off-center hole in the screw is the "arrow". I've seen that on a different machine. Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Contributing Member friquant Posted January 15 Contributing Member Report Posted January 15 Is this a newly acquired machine? Has the feed dog moved correctly (without play) in the past? Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Members Guell Posted January 16 Author Members Report Posted January 16 On 1/15/2026 at 9:59 AM, Northmount said: I moved your post to Leather Sewing Machines. You'll get more help here. Help wanted is more for hiring someone to do a job. Like the classifieds in a newspaper. Help wanted also requires all posts to be approved by a moderator. Thank you 😊 Quote
Members Guell Posted Sunday at 07:30 PM Author Members Report Posted Sunday at 07:30 PM On 1/15/2026 at 11:12 AM, friquant said: Is this a newly acquired machine? Has the feed dog moved correctly (without play) in the past? Yes new acquisition. I am no sure i was just trying to set the feeddog and seen the play Quote
Contributing Member friquant Posted Monday at 02:51 AM Contributing Member Report Posted Monday at 02:51 AM By the way those excenter screws, assuming there is nothing pinning it in place you can see which side is the high vs low side by turning them in-place. On 1/15/2026 at 12:10 PM, Guell said: must press it in the direction of the arrow or the washer will fall out causing play Maybe the washer already fell out, either for you or for a previous owner? Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.