Members fibersport Posted February 15 Members Report Posted February 15 Found my bobbin case has a groove worn into the case and the spring, that would explain why I could never seem to tighten the bobbin thread. Can anyone suggest a supplier for a new one? Curious too if anyone has tried an aftermarket one or is it something you would only use a genuine Pfaff part for? The number is 91-08 348-91 for the complete case and spring. Thanks - Quote
Members fibersport Posted February 16 Author Members Report Posted February 16 Well I took a chance and ordered an aftermarket one. A Pfaff runs well over $100 if you can even find them. There is a post on this forum that states it's the same case used on some Juki's. Hopefully the one I ordered will fit and will work. If it does, might order a couple more just in case. Quote
Contributing Member friquant Posted February 18 Contributing Member Report Posted February 18 I bought this one and it was fine: https://www.amazon.com/dp/B0D3V2SB9N (Complete hook and bobbin case assembly) Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.