Members ABC3 Posted April 10, 2009 Members Report Posted April 10, 2009 What is the best way to remove Barge "all purpose cement" from raw leather? I keep getting it on belt liners. I guess I'm putting too much on - maybe just a small amount in the middle of the liner is all it takes prior to sewing. I have tried several things to remove it but the dye ect will not take the same way on that area. Quote NRA Member Certified Firearms Instructor www.agcustomgunleather.com
hidepounder Posted April 10, 2009 Report Posted April 10, 2009 Tom, When the glue is dry it should be easy to remove by rubbing it...try using an eraser to get it up. When you've applied the glue to the leather, make sure you clean up any residue before on your glueboard before setting the second piece of leather on it. It shouldn't be difficult to keep the leather clean of glue. When you do get a little residue, after removing it, clean the leather with Oxalic Acid. Bob Quote
Members ABC3 Posted April 10, 2009 Author Members Report Posted April 10, 2009 hidepounder, Thanks for the fix.... Quote NRA Member Certified Firearms Instructor www.agcustomgunleather.com
Members kevinhopkins Posted April 13, 2009 Members Report Posted April 13, 2009 Actually, those strange rubber blocks that you can buy at Grizzly for cleaning sandpaper up work pretty well. And for what it's worth, they do about a million other things that are pretty nifty. If you ever have to take thread out of stitching holes, it will pull em' out quicker than a duck on a junebug! We buy the big blocks and cut them up into small pcs on a clicker press so we can resell them. It's probably one of our most ordered items. Quote
Contributing Member TwinOaks Posted April 13, 2009 Contributing Member Report Posted April 13, 2009 Deglazer (Fiebing's) works pretty well to remove any left over residue once you rub off the rest. Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
hidepounder Posted April 13, 2009 Report Posted April 13, 2009 Actually, those strange rubber blocks that you can buy at Grizzly for cleaning sandpaper up work pretty well. And for what it's worth, they do about a million other things that are pretty nifty. If you ever have to take thread out of stitching holes, it will pull em' out quicker than a duck on a junebug! We buy the big blocks and cut them up into small pcs on a clicker press so we can resell them. It's probably one of our most ordered items. That's a good tip! Bob Quote
gtwister09 Posted April 13, 2009 Report Posted April 13, 2009 Kevin, I purchased the large sheets for the thickness sander and cut them up and use them for all sorts of things like that. My son had to pull stitching on an old holster once and was complaining about it. So I gave him on these small ones to help get the stitching out quickly and his grandfather (on my wife's side - that's my story...and I'm sticking to it) said it was great for rolling up booger balls too (rubber cement). My son laughed a lot at that. Regards, Ben Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.