Members Shorts Posted June 23, 2009 Members Report Posted June 23, 2009 Just curious if I undertook a project of a leather cheek pad and shell holder what weight leather should i use? It'd be a lace-up gizmo. Quote
Members DCKNIVES Posted June 23, 2009 Members Report Posted June 23, 2009 I use 7-8oz on mine.Dave Quote
Members 1Man Posted June 23, 2009 Members Report Posted June 23, 2009 Hi, I used 7/8 and lined it with some tooling kip from Tandy's. I used brass rivets to hold down the bullet loops (2/3 tooling kip) and brass eyelits so I lined it so the brass didnt' touch the wood. I think it turned out pretty nice. Quote
Members Shorts Posted June 23, 2009 Author Members Report Posted June 23, 2009 Perfect, thanks guys. I've got that on hand. Quote
Contributing Member TwinOaks Posted June 24, 2009 Contributing Member Report Posted June 24, 2009 (edited) I made one out of 3-4oz, and laced in the butt. It's a work in progress, as I intend to install a padded comb pad, a couple of shell holders, and a nice little pouch on the side of the stock for ear plugs. I would like to suggest being sure to use grommets or eyelets. It's easy to put a lot more pressure on the lacing holes than intended. Edited June 24, 2009 by TwinOaks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.