casull45450 Report post Posted August 7, 2009 Hello All, I believe i posted this in the wrong forum so i am posting it again here!! Hello Everyone, I have a Krebs Style Splitter that is in great condition but is missing the main spring... Does anyone know where i might be able to find one?? Thanks in Advance Bill Share this post Link to post Share on other sites
steveh Report post Posted August 7, 2009 If you are refering to the type of splitter that has a brass guage on the back side, there are two tension leaf type springs that apply pressure down on the top roller. The springs are thin arched spring steel. I would imagine finding will be difficult to find. You might be able to have a good machine shop make some. Share this post Link to post Share on other sites
cgleather Report post Posted August 7, 2009 Try Bob Douglas it is possible that he could have some spare parts around his shop. 1-307-737-2222 Share this post Link to post Share on other sites
tomcat Report post Posted August 8, 2009 Try here, they have a lot of machine parts, and are very helpful... http://campbell-bosworth.com/catalog/ Share this post Link to post Share on other sites
