WesTexas Posted January 10, 2010 Report Posted January 10, 2010 After several years of constant wear, my favorite pair of deck shoes gave out. Rather than just pitch them, I decided to deconstruct them to see how they were made. Once I had all the pieces laid out I figured it wouldn't be that hard to create some patterns and make a pair of moccasins. So that's what I did, learning all the way. They fit like the proverbial pair of gloves and wear better than plain socks around the house. Think I'll make another pair for wearing outside. Quote
Ambassador Luke Hatley Posted January 10, 2010 Ambassador Report Posted January 10, 2010 THOES ARE VERY NICE A+.... WHAT TYPE OF LEATHER DID YOU USE? Quote
Ambassador abn Posted January 11, 2010 Ambassador Report Posted January 11, 2010 I've always wanted to make a pair of moccasins... I guess I'll have to add this to my list of future projects. Yours turned out really great, by the way. Congrats! Quote
Members Leatherimages Posted January 11, 2010 Members Report Posted January 11, 2010 You did a very fine job. What leather is this? Did you line it? Good luck with your outdoor versions. Paul Quote
WesTexas Posted January 11, 2010 Author Report Posted January 11, 2010 Thanks all. The leather is a pebbled grain upholstery leather I got on clearance from a Tandy outlet. I used some Eco dye on it. Quote
Members oddball Posted January 18, 2010 Members Report Posted January 18, 2010 What do you call the different lacing techniques you used on the toe and around the part wher the foot goes in (is there a name for that area)? Quote
WesTexas Posted January 19, 2010 Author Report Posted January 19, 2010 What do you call the different lacing techniques you used on the toe and around the part wher the foot goes in (is there a name for that area)? I'm not sure about the name of the lacing technique. I looked at a couple of sources I have and didn't find it in them. Also, not sure about the hole but the leather around the hole is referred to as the cuff. I tried a couple of stiching techniques and this one allowed me to keep to use the same technique and not make any adjustments. I like it because it looks nice on both sides when both are exposed. Yeah. Yeah. But how did you learn it? Honestly, it might be something I've seen in the past and my leather working past is very, very short (six months), but I just played around with some lace until I saw something that would work and I liked. Anyone know the name of the stitch? Please give us the source if you have it too. The stitch is quite simple. Starting on the inside and leaving plenty of lace to weave back through the stitch, go two holes forward. Stitch back to hole you crossed over, come out and go two holes forward. Repeat. The technique would suggest the name - 2 Steps Forward and 1 Back The key is to always make sure you come out on the same side of the lace that is covering the hole you come back to. Its also easier to leave the crossover stitch a bit loose until you've come back out of the hole. Of course, keep the lacing flat, no twist, etc. Thanks and hope this helps. Quote
WesTexas Posted February 9, 2010 Author Report Posted February 9, 2010 Found it! - Just picked up a copy of Bruce Grant's Leather Braiding and there it was on page 146, Stairstep Applique of One Thong. Quote
Members salvi Posted May 4, 2011 Members Report Posted May 4, 2011 Wonderful job! Congratulations. Quote
Members Wassookeag Moccasins Posted June 2, 2011 Members Report Posted June 2, 2011 Found it! - Just picked up a copy of Bruce Grant's Leather Braiding and there it was on page 146, Stairstep Applique of One Thong. Hmmm, very interesting, I like it! ... maybe I'll borrow it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.