GIBSON PANCAKE GLOCK 19 23 32

[BruceGibson]

Haven't posted a holster pic in a while, so I thought I'd put this one up for your input. It's got a 15-degree rake, and the backside is left natural. Belt slots are for a 1.5 inch wide, 1/4" thick gunbelt.

[usmc0341]

Man your holsters look nice. Are you hand or machine stitching?

[BruceGibson]

Man your holsters look nice. Are you hand or machine stitching?

Thank you, sir. I machine stitch with an Artisan Toro 4000P. Top thread is 346 with 277 in the bobbin.

[usmc0341]

I hope to get to your level at some point. I love looking at yours and Boomstick's holsters.

[Denster]

Really nice holster Bruce. I really like the tight stitchline right up to the weapon profile, that curved backsweep from the rear toe into the wing is a nice touch also.

[dbusarow]

Bruce,

Any chance of getting a shot of the backside of this holster? I'm real curious about the natural back/black front combo.

Thanks,

Dan

[BruceGibson]

Bruce,

Any chance of getting a shot of the backside of this holster? I'm real curious about the natural back/black front combo.

Thanks,

Dan

Here's the backside, Dan. I left it natural to avoid dye bleed or rub-off.

[BruceGibson]

Really nice holster Bruce. I really like the tight stitchline right up to the weapon profile, that curved backsweep from the rear toe into the wing is a nice touch also.

Thank you, Denster. I was trying for something a little different without getting too far over the top.

[dbusarow]

Here's the backside, Dan. I left it natural to avoid dye bleed or rub-off.

I figured preventing dye rub off was the motivation, but the result goes beyond that. That is just plain beautiful.

Dan

[dickf]

Very nice as always, Bruce! I really like the clean backs - it's classy.