Members ryano Posted January 31, 2010 Members Report Posted January 31, 2010 I am in need of a really good needle bar and needle bar race for a Landis 3 stitcher. The race is the fan shaped piece that the needle bar rides in. Keep in mind that the needle bar is at the bottom. Thanks! 567-674-5408 jo386001@gmail.com Quote
Members D.A. Kabatoff Posted February 1, 2010 Members Report Posted February 1, 2010 Hi Ryano, I got one from Campbell-Bosworth a couple of years ago... they are remanufacturing them. Interesting part is, I have two machines and took the needle bar from one machine and stuck it into the needle bar stand from the other machine and it was as tight as the new one CB sent... was like putting new ones in both my machines. Can't remember what they were charging but it was fairly reasonable and saved a lot of time looking. Darcy Quote
Members ryano Posted February 2, 2010 Author Members Report Posted February 2, 2010 Hi Ryano, I got one from Campbell-Bosworth a couple of years ago... they are remanufacturing them. Interesting part is, I have two machines and took the needle bar from one machine and stuck it into the needle bar stand from the other machine and it was as tight as the new one CB sent... was like putting new ones in both my machines. Can't remember what they were charging but it was fairly reasonable and saved a lot of time looking. Darcy Thanks for the information Darcy. Greatly appreciated! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.