Dink Report post Posted February 3, 2010 I have recently been working with a new die maker that has been making me a few clicker dies. He has done a very good job on the ones I had made. If you need any dies give him a try, he has been offering a satisfaction gurantee / if you do not like it you are not obligated and may return it. PRO Die is the company and he may be reached at 720-341-3259. Or you can contact me and I will get message to him prorodeooutfit@aol.com Quote Share this post Link to post Share on other sites
JET4 Report post Posted February 8, 2010 I know it's a loaded question,but what do they charge (ballpark wise). Having dies would make my life A LOT easier when big orders roll in. JET Quote Share this post Link to post Share on other sites
Luke Hatley Report post Posted February 9, 2010 AT ONE TIME I WAS TOLD A $1.00 AN INCH.... MORE IF YOU NEED PUNCH TUBES IN THEM Quote Share this post Link to post Share on other sites
Dink Report post Posted February 9, 2010 Jet4 Dies now run about $1.80 per inch, and the minimum charge is $30. The clicking service is also available here if you were to get your die made and then you have them clicked also if you do not have a clicker or other means to punch them. If you are interested it cost nothing to send a copy of the pattern and get firm pricing. it can be faxed or emailed. Fax 303-660-0905 or e-mail to prorodeooutfit@aol.com. If you choose to do this include the measurements, because fax and email tends to vary the size on some things. A pattern can also be mailed if that is easier for you. just give Chris a call he is very easy to work with Thanks Dink Quote Share this post Link to post Share on other sites
