Timbo Posted March 3, 2010 Report Posted March 3, 2010 When putting in the ground seat, do you all cover the whole front of the cantle face?? Or do you just go part of the way up with the first layer of ground seat?? So you ever put the saddle seat itself to the rawhide of the cantle face?? How important is it to cover all the nails in the rawhide of the cantle face with ground seat leather?? Ok so it was actually 4 questions. Timbo Quote
Members kseidel Posted March 3, 2010 Members Report Posted March 3, 2010 I always run my groundseat leather to the top of the cantle when putting in a hard seat. I want to make the foundation under the hard seat as smooth as possible. The nails in the tree leave a depression that is magnified under the final seat leather. I can also correct any discrepancies in the shape of the cantle. If you are doing a full padded seat, it is not as critical. Keith Quote
Timbo Posted March 3, 2010 Author Report Posted March 3, 2010 Ok, that makes sense. I'm building a hard seat, but I've already got my ground seat in but didn't go all the way up the cantle. I've seen it done before but I guess I'll need to go ahead and put in a piece up the cantle and blend it into the ground seat that is already in place. Quote
Members kseidel Posted March 3, 2010 Members Report Posted March 3, 2010 Ok, that makes sense. I'm building a hard seat, but I've already got my ground seat in but didn't go all the way up the cantle. I've seen it done before but I guess I'll need to go ahead and put in a piece up the cantle and blend it into the ground seat that is already in place. For me, they best blend together at the base of the cantle. Higher up the cantle leaves a visible line that is hard to hide. Keith Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.