Members AaronD Posted March 9, 2010 Members Report Posted March 9, 2010 Hi Everyone, Does anyone here know of a supplier of the Post and Ring (for leash snap connection) shown in the pic?These collars were made in Spain. I know of another dog collar maker who uses a similar post and ring setup, but he wouldn't divulge his source in Germany. Any help would be appreciated. Quote
Members somewhereinusa Posted March 10, 2010 Members Report Posted March 10, 2010 CREATIVE DESIGNWORKS, LLC These are good people to work with. these might work Quote
Members AaronD Posted March 10, 2010 Author Members Report Posted March 10, 2010 CREATIVE DESIGNWORKS, LLC These are good people to work with. these might work Thanks I will contact them. I can't tell if those are welded. Don't know how strong they would be for my application. They look somewhat smaller than the ones used on the other collars. thanks again, it's a good starting point. Quote
Members AaronD Posted March 11, 2010 Author Members Report Posted March 11, 2010 CREATIVE DESIGNWORKS, LLC These are good people to work with. these might work Nancy wrote back stating she did not have a source for those types of Post and Rings. Any other suggestions would be appreciated. Thanks, Aaron Quote
Members AaronD Posted May 25, 2010 Author Members Report Posted May 25, 2010 (edited) Still searching for the setup. I've been to Horse leather saddle makers, and sail boat suppliers, and fastener suppliers. Herm Sprenger has a very small 9mm in Diameter post and ring setup, but it is too small for my application. This German website has similar hardware on their collars. http://www.bentaiga....lish/home_e.htm Does anyone know of a German Hardware Website that might carry that type of hardware? I appreciate everyones help, still haven't found it yet. I will keep searching... thanks Aaron Edited May 25, 2010 by AaronD Quote
Moderator Art Posted May 26, 2010 Moderator Report Posted May 26, 2010 Hi Aaron, Contact OTB and talk with Ray Patel, he's the hardware guy. If he can source it (they use a lot of Belgian hardware), I'll take 50 or 100. Art Still searching for the setup. I've been to Horse leather saddle makers, and sail boat suppliers, and fastener suppliers. Herm Sprenger has a very small 9mm in Diameter post and ring setup, but it is too small for my application. This German website has similar hardware on their collars. http://www.bentaiga....lish/home_e.htm Does anyone know of a German Hardware Website that might carry that type of hardware? I appreciate everyones help, still haven't found it yet. I will keep searching... thanks Aaron Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.