Flatbed Attachment For Tippmann Boss

[shammatt]

I'm new here in the group. Recently purchased a slightly used Tippmann Boss (aluminum). I'll be doing some occasional flat work and I'm sure that a flatbed will be necessary for my use. Looking for a screaming deal on a flatbed attachment for the Boss (or Aerostitch??), I've heard that they are the same unit.

See Photo Here.

Super thanks for any assistance.

Steve Hammatt

Mount Vernon WA USA

Email me

[iwannabeacowboy]

http://www.tippmannindustrial.com/index.php?cPath=22_25_44&osCsid=fa82f09574f0f58cdb5fbfca07488a3a

charlie

[shammatt]

Found what I needed via on-line auction.

Thanks!

[Luke Hatley]

Found what I needed via on-line auction.

Thanks!

Tell us about your Leather Liscens Plates.

[shammatt]

Tell us about your Leather License Plates.

Before states issued their own license plates (the dates varied from state to state),

the horseless carriage owners were licensed and given a registration or license number.

The vehicle owner provided some form of i.d. using that number, usually mounted on

the rear of the vehicle, sometime both front and rear. Sometimes made from steel

or even wooden boards with painted or metal numbers, the owners mounted their

own plates. One of the more common ways of complying with the law was to order

plates made by a mail-order vendor and these were commonly made from leather.

This is what I duplicate and at the same time I protect license plate collectors by

ensuring that there are a couple of ways of making sure that these reproductions

cannot be passed off as originals.

Thanks for listening<grin>

[Luke Hatley]

Before states issued their own license plates (the dates varied from state to state),

the horseless carriage owners were licensed and given a registration or license number.

The vehicle owner provided some form of i.d. using that number, usually mounted on

the rear of the vehicle, sometime both front and rear. Sometimes made from steel

or even wooden boards with painted or metal numbers, the owners mounted their

own plates. One of the more common ways of complying with the law was to order

plates made by a mail-order vendor and these were commonly made from leather.

This is what I duplicate and at the same time I protect license plate collectors by

ensuring that there are a couple of ways of making sure that these reproductions

cannot be passed off as originals.

Thanks for listening<grin>

Thank you so much for the information.