Jump to content

Recommended Posts

  • Members
Posted

Well, I have a really odd request here...lol.

I am a lover of paintball and have been since 1986. For those that don't know much/anything about it, paintballs are 68 caliber gelatin spheres, filled with FDA approved food dye and for all intents and purposes, "soap." They are fired from a paintball marker at up to 300fps, which is about 202mph.

I have a field 'persona' which is my name...'druid' - this persona includes wearing [besides the required safety gear] a Kilt, greaves and vambraces. I want to make two items to complete my persona:

1. A 'reversed' Coat of Plates like the Gaberdine pictured

2. Leather "helmet" that covers my field mask.

Pic of the Gaberdine

coatofplates.jpg

Now...I want to 'reverse' the design. Instead of the 'plates' being on the inside, I want to mount them on the outside. The leather won't be so "thick"...perhaps in the 8-10oz range. I mean I could use 16oz but I'm trying to cut down on weight, as well as cost.

I will use brass or copper rivets in the corners to attach the 2" x 3" plates to the garment underneath. Also, the armor will only come to my waist, not to extend down to the upper thigh like in the pic. The front and back plates will cover my like firearm body armor....completely covering my front and back and join with belts/buckles on my sides.

The Helm is also going to be made from leather and will cover the entire mask. It will look sort of like the Corinthian Helm you saw in the movie "300"....with the exception that I want to tool Celtic designs in it.

My question is:

Which is the best way to harden and protect the leather from;

1. water and perspiration

2. Paintball strikes and staining

???

I've read up on water-hardening, as well as paraffin wax-hardening the leather. The problems I face are the fact that it gets hot in the summer and I will perspire....as well as some paintballs will stain all kinds of garments. To me, water hardening the leather won't protect it from water/sweat or paintball staining...and waxing it will just "melt" and soften in the sun and heat.

OR

Is there another method of hardening the leather into "armor" AND protect it from these things? Some type of liquid solution that I can soak the leather into and accomplish these goals? On my greaves and vambraces, I used "Mod Podge" to coat the leather but it's soft and supple leather...not hard 'armor' leather.

Any help is greatly appreciated.

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

Posted

http://www.legiodraconis.com/

http://www.armourarchive.org/

I am not an armor person but these two sites and message boards should give you just about all the info you need.

and wax hardening isn't so "melty" as you think it might be.

I play in the Society for Creative Anachronism and a lot of people wear leather armor and I don't notice it melting in the sun.

you also might want to look into japanese plate armor, it is made up of little plaques laced together, and there are a lot of sources for buying the plates. (Most are plastic barral and are VERY hard. Done right you might not even need the "regulation" paintball armor)

Reality is for people who lack imagination

Whether you think you can or think you can't - you are right. ~Henry Ford

  • Members
Posted

http://www.legiodraconis.com/

http://www.armourarchive.org/

I am not an armor person but these two sites and message boards should give you just about all the info you need.

and wax hardening isn't so "melty" as you think it might be.

I play in the Society for Creative Anachronism and a lot of people wear leather armor and I don't notice it melting in the sun.

you also might want to look into japanese plate armor, it is made up of little plaques laced together, and there are a lot of sources for buying the plates. (Most are plastic barral and are VERY hard. Done right you might not even need the "regulation" paintball armor)

Thanks Suze...I'll check them out.

In regards to the "melting"...that was just something I thought of on my own. I've been to fairs were the SCA fighters were doing their thing but in truth, I've noticed that they spar for up to 15 minutes at a time and then trade out 'warriors.' Paintball is a little more time-intensive than that...depending on the circumstances/type of scenario, we can literally be out in the direct summer sun for hours at a time. I'm worried that in waxing the leather, it will soften and allow the 'plates' to deform.

The "armor" is to be more aesthetic than 'practical' - meaning that yes, it will provide protection simply because of the nature of its construction, it's more for the "affect" of other players seeing me and getting an "awe man, that's COOL" type of response...lol.

While I did look to other armor designs, including the Japanese you described, none really match my "druid"/Scottish field personal quite like the Coat of Plates/Gaberdine does.

Paintball does not require any type of 'armor'...with the exception of certified goggle/mask systems specifically designed for paintball. Any armor we wear is purely by choice. In this particular case, I want to make my 'armor' and incorporate pod and air tank holders on the back because those items are needed for playing the game.

I actually thought about using Kydex but I wanted it a bit more 'realistic' for the 'look'

  • Members
Posted

Maybe you sould try 1 or 2 small pieces of the leather you are gone use, harden them and left them for a couple of hours in a saline solution (water with 0.91%salt).

This should be a lot harder on the leather then a match of paintball.

I do simulation of medieval armor, I could spend 12 hrs in a row running and fighting at 30 C (about 80 F).

I use cuir bouilli (with water not wax) and a couple of coat of varnish. So far I did'nt have any probleme with my armor.

You said you want to use a leather greek style helm over your field mask, The probleme with those was the perception. It reduce the field of vision (especially if you put it over something else) and the noise. For close combat in a open field it's not a big issues but for range attack and ambush situation those could be a big probleme. Anyways it would still look very cool, please post a picture of your kit when it is done.

  • Members
Posted (edited)

ote name='yan' date='07 May 2010 - 07:40 AM' timestamp='1273232418' post='153614']

Maybe you sould try 1 or 2 small pieces of the leather you are gone use, harden them and left them for a couple of hours in a saline solution (water with 0.91%salt).

This should be a lot harder on the leather then a match of paintball.

I do simulation of medieval armor, I could spend 12 hrs in a row running and fighting at 30 C (about 80 F).

I use cuir bouilli (with water not wax) and a couple of coat of varnish. So far I did'nt have any probleme with my armor.

You said you want to use a leather greek style helm over your field mask, The probleme with those was the perception. It reduce the field of vision (especially if you put it over something else) and the noise. For close combat in a open field it's not a big issues but for range attack and ambush situation those could be a big probleme. Anyways it would still look very cool, please post a picture of your kit when it is done.

Thanks. I will try the salt solution.

Yeah, the ferocity of paintball games is dependent upon the "game of the day." Most times, it's "walk-on" games of teams about 20 vs 20 but there are large scenarios where it's as large as 2000 vs 2000 [invasion of Normandy recreations]. I'm making this set up for a future Oklahoma D-Day [the game I just described] and the event is in OK, in June, and the average temps can get to 104*F with an 80% humidity. I'm concerned that this type of weather will affect the "look" of the leather by heating it up [by sun and my heat/perspiration discharge] and distorting it. I read up on the cuir bouilli process and find it to be the most simple and historically accurate method of making the armor but the reason I investigated the paraffin method was to give it a layer of outside protection from paint staining. With my concerns on the State's weather tendencies, I was concerned that the wax would soften, allowing the armor plates to bend and perhaps, crack the wax finish...

You say you use varnish on your armor. That's interesting. Do you find that it cracks or flakes when struck with instruments? Or even over time? How well does it take a re-varnish? Does it "wrinkle" when applied over [re-varnishing] a previous coat?

I'd have to scan my armor sketches into my HD for you to see, but I have been working on the helm. Now, this helm fits over top of the face shield/goggle for paintball. The base is Kydex and will have the leather cemented to it. The leather will be a thinner tooling leather so I can carve Celtic designs into it, like you see on my cardboard templates:

100_2572.jpg

100_2567.jpg

100_2570.jpg

100_2571.jpg

7Cuttemplate.jpg

100_6321.jpg

Fileshapinghelm007.jpg

And the top/crown of my skull will be covered as well. I plan on replicating a "pony tail" mount like this one [taken from a movie] :

TrytoReplicatethis4.jpg

...with similar intent but different design. I'll be using a horse tail as the "hair" exiting the mount. The hair will be approx 16" long, have a few braided strands in it and very small skulls as the braid locks at the bottom.

The armor itself front and back, is made from the plates, riveted to an undergarment that actually makes the vest form. Think about police body armor . The carrier that the panels use will be the template for the undergarment.

Now, on my lower back will be pod holders. These are pouches that hold cylindrical tubes, that hold < 180 paintballs per tube. I need at least 6 but would prefer 8.

I'll form the leather over these tubes and use Chicago Screws to hold them in place around the border. That way, I can remove the holders for cleaning/servicing.

My air tank will be mounted horizontally across my shoulder blades. . This too will be mounted with Chicago Screws.

Here are pictures of my paintball "tactical' vest to give you an idea of what I'm talking about:

Pods

Picture010.jpg

tank - in this pic, you see two vertical tanks. I'm going to make it so that it's one tank and horizontal instead:

moddedvest1.jpg

...and the prize at the end of the day is my crossbow:

crossbowboard.jpg

ProdPlate1.jpg

Almostdone4.jpg

13UpdateJuly11.jpg

Concealed inside the "crossbow" facade is a paintball marker. My design loads from underneath, instead of the typical top-feeding markers. Imagine me coming over a castle rampart shooting players like this.....

Edited by druid
Posted

the SCA folk at ren fairs and such are Demoing what we do -- there is a huge event in Pennslavania every summer called Pennsic War (www.pennsicwar.org)

in August in 100 degree heat -- they armor up and stay that way most of the day. (trust me some days a "strong man" is NOT good to find -- or follow)

If leather armor got all squishy in the sun they wouldn't be wearing it. Our rules and regs for keeping people safe are very strict.

Reality is for people who lack imagination

Whether you think you can or think you can't - you are right. ~Henry Ford

  • Members
Posted

Your crossbow is really good looking .

Since you're going for the ''brigandine look'' you could use chrome tan softer leather for the base veste. I did that in my first armor and got 2 good year use (it still good, I just maid a better looking one).

I don't use my armor for paint ball so I don't need to removed trace of paint on it.

For the varnish I used 5 coat of the eco-flow super shene finish on both side of the leather. It's ok, look a little beat up after a many use (but that's the look I was going for), no trace of crack and it has been use at least once under heavy rain for over 3 hrs.

I tested a couple of product :latex base, water base and oil base varnish but this one gave me a better result.

If any one discover something better please post.

  • Members
Posted

A couple of things. First, why do you want to put the plates on the outside of your armour, instead of as shown in the first picture ? They will trap bits of paint and paint ball, and, of course, pretty well guarantee that you get breaks if the ball touches you. Plus it's not like any historic example of armour (and for good reason, since the plates on the outside would catch spear points, sword edges, arrows...)

Second, I recommend for your purposes you harden your leather by soaking it in acrylic floor polish. It works quite nicely, should make it easy to clean off the paint that isn't trapped in the crevices ;0 and is really easy to do.

I make hardened leather armour, using various techniques. The acrylic polish is easy to renew, relatively water resistant (nothing is "proof") and the best bang for your buck in terms of ease of production and cost.

Leather hardened by dampening it and then baking at ~150F does not soften up when it gets wet, the structure of the leather has fundamentally changed. But it does break down over time.

Peter Ellis

Noble Lion Leather

  • Members
Posted

Honestly, I'd suggest a 4-6 ounce garment leather for the "coat", and use cut up plates of pickle barrel or kydex for the inside coat of plates part. Super stiff and super light, and unseen, so who cares if it's plastic. I give a second vote for putting the plates inside as well. It's historically correct and a billion times more functional than having them outside, like Peter says.

  • 1 month later...
  • Members
Posted

I LARP a lot in leather armor. I've been in heat and rain and both will affect your armor. Waxing and waterproofing help but the thickness of the leather seems to be the most important element. All the thin elements "wilt" first in negative conditions.

Tandy Leather sells a Sole Bend that is 15oz leather that is compressed for use in making soles of footwear. It's quite expensive but it's so hard that you could get away without hardening it at all and still have a solid amount of protection. If you did harden it, you'd have some pretty protective armor.

I think you've got the ideal form of armor, brigadine, if I'm not mistaken - a soft leather shell with hard plates on top. The soft leather will prevent a lot of your sweat from getting onto the hard leather. There is no stress on the plates so they won't crack.

I would dye it black. If paint stains become a problem, you can just dye it black again. I've never had paint ball paint on leather and I don't know what it would take to block it, or get it out. As mentioned previously, test peices are the way to go.

Mark Charke

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...