Jump to content

Wanted: Manual Adler 105-64 Free Arm/cylinder Arm, Heavy Duty Sewing Machine,


Recommended Posts

Posted

Everybody says Original Adler parts are too expensive, I do not think so. I just bought a new complete shuttle for my Adler 105 from Dürkopp Adler Norway. The price was the same as for an aftermarket shuttle from Hirose on EBay. 189$ here in Norway (one of the most expensive country in the world) this was a part stamped Dürkopp Adler. And thanks to the new blog I found the right shuttle for my obsolete Adler class 5-27, Dürkopp Adler still have shuttles for the old class 5 and class 4. You just need the right part number and I have those numbers. I am about to start a new topic about DA spare parts and part numbers for the old classes 105, 104 , 5 and 4 with all subclasses. I will inform you about missing part numbers and changes on machines that I know of there.

Trox

Yes Trox, very slow.....these guys from Adler are right on top of it....they send me a seperate PDF file.....very nice!!

As Trox said, lots of good info and good downloads too!!

Go check it out.....maybe we all can quit paying for cheap

Unreadable copies....

Aloha

Jimbob

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • 3 years later...
  • Members
Posted

I have an English manual for the Adler 105-64, 38 pages. The front page states that "this manual is intended to provide rapid information to the sewing machine mechanic and to assist in the carrying out of adjustments and repairs to the machine. It is assumed that the mechanics will have a basic knowledge of dismantling and assembly of the machine. This booklet contains a brief summary of the main functions and necessary adjustments as well as hints ono othe elimination of faults." It has four sections, Techanical Info, Functions, Adjustments and Trouble-shooting. I purchased it on ebay for $20 Plus $5 shipping. I'll make you the same deal and set up a Buy Me Now Auction if you're interested. I looked high and low for the manual and finally found a seller with a machine that agreed to make me a copy. I just recently purchased my Adler and the owner didn't have one. Let me know if you are interested. I may go ahead and set up an auction as I know there are others out there looking for the same thing.

  • Members
Posted

I also have now a english Adler service manual and partslist

For the Adler 105-64....

But I give mine away for free!!!

PDF file....ping me if ya all need o e...and yes it is for free!!

James

Do you still have that manual? I just received a alder 105-64 and need help setting it up. Thank you.

My email address is jess75cc@yahoo.com if you could email it to me

Thanks

  • Moderator
Posted

Do you still have that manual? I just received a alder 105-64 and need help setting it up. Thank you.

My email address is jess75cc@yahoo.com if you could email it to me

Thanks

You just handed your email address to every spammer and forum harvester bot in the World. Matters like this should be handled via the forum's private messages system. Only logged in members can access data posted in them. Anybody can see text posted in topic pages.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...