Singer 111W151

[mpm32]

Hi,

I found this site looking for info on my machine and there seems to be a lot of people here that are knowledgeable about these old industrial machines that might be able to help me.

I just got a singer 111W151 in great working order. I got it to do some car and boat upholstery on (or learn to do it).

It came with a 1/4" welting foot. I am looking to get some other foot sets for it. I noticed that the rear presser foot for this machine come in two configurations. One with the shank 90 degrees to the other. I am sure you can change the orientation of the presser foot shaft but I cant see how to do it.

Mine is oriented this way;

Most sets I've seen are oriented this way;

I did find the US Army manual for this machine but I doesn't tell how to do this. Can the orientation of the presser foot shaft be changed? If so how would I do it? If not, where would I find foot sets for my machine's presser foot shaft orientation? Most foot sets I've seen have been oriented 90 degrees to mine.

Thanks in advance.

[CowboyBob]

The feet that mount the other way are for 111w style of machines that have the 2-pc walking feet here's a listing of the feet we have for your machine which is called a needle feed.

The file is too big to put here if you want to send me a pm w/your email address I'll send it.

Thanks,

Bob