Members John at Byson Posted September 27, 2010 Members Report Posted September 27, 2010 Hi. I have just brought a Singer 29K56 (long arm) which will replace our 29K58 (short arm) machine. This is a solid arm model but the vast majority of the parts are the same. But the rack box is an inserted item held in from below by two screws and the shuttle holder bush is a plain cylinder, not the "top hat" design used on the K58. Anyone any ideas as to where I can get hold of one of these bushes (part # 82070) and (more unlikely) a rack box which I think is part # 82065 ? I can probably get the bush made up, and that would also negate the need for the box as I can then have it half a thou oversize, but parts would be favorite. Quote Fixin' motorcycle leathers since....far too early this morning :-)
Moderator Wizcrafts Posted September 27, 2010 Moderator Report Posted September 27, 2010 Hi. I have just brought a Singer 29K56 (long arm) which will replace our 29K58 (short arm) machine. This is a solid arm model but the vast majority of the parts are the same. But the rack box is an inserted item held in from below by two screws and the shuttle holder bush is a plain cylinder, not the "top hat" design used on the K58. Anyone any ideas as to where I can get hold of one of these bushes (part # 82070) and (more unlikely) a rack box which I think is part # 82065 ? Toledo Industrial Sewing Machines, in Toledo, Ohio, USA, has parts for Singer patchers. Their phone number is 866-362-7397 Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.