Singer 29K56 Problem

[John at Byson]

Hi. I have just brought a Singer 29K56 (long arm) which will replace our 29K58 (short arm) machine. This is a solid arm model but the vast majority of the parts are the same. But the rack box is an inserted item held in from below by two screws and the shuttle holder bush is a plain cylinder, not the "top hat" design used on the K58. Anyone any ideas as to where I can get hold of one of these bushes (part # 82070) and (more unlikely) a rack box which I think is part # 82065 ?

I can probably get the bush made up, and that would also negate the need for the box as I can then have it half a thou oversize, but parts would be favorite.

[Wizcrafts]

Hi. I have just brought a Singer 29K56 (long arm) which will replace our 29K58 (short arm) machine. This is a solid arm model but the vast majority of the parts are the same. But the rack box is an inserted item held in from below by two screws and the shuttle holder bush is a plain cylinder, not the "top hat" design used on the K58. Anyone any ideas as to where I can get hold of one of these bushes (part # 82070) and (more unlikely) a rack box which I think is part # 82065 ?

Toledo Industrial Sewing Machines, in Toledo, Ohio, USA, has parts for Singer patchers. Their phone number is 866-362-7397